 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP1004A(F),TLP1005A(F) TOSHIBA Photointerrupter Infrared LED + Photo IC TLP1004A(F), TLP1005A(F) Lead Free Product Home Electric Equipment Such As VCR, CD Player OA Equipment Such As Copying Machine, Printer, Facsimile, Etc. Automatic service Equipment Such As Vending Machine, Various Position Detection Unit in mm TLP1004A(F) and TLP1005A(F) are digital output photo-interrupters combining GaAs infrared LED with high sensitive and high gain Si photo IC. Directly connectable to TTL, LSTTL and CMOS. * * * * Printed wiring board direct mounting type Gap: 3mm Resolution: Slit width 0.5mm Digital output (with a pull-up resistor) TLP1004A(F): Low level output at shielding TLP1005A(F): High level output at shielding Built-in schmitt circuit Threshold input current: 4mA (max.) at Ta = 25C Operating supply voltage: VCC = 4.5V~17V High speed response Detector side is of visible light cut type TOSHIBA Weight: 0.8g (typ.) 11-13G1 * * * * * Pin Connection TLP1004A(F) 1 AMP 10k 10k VOL. REG. 3 4 2 5 TLP1005A(F) 1 AMP VOL. REG. 3 4 2 5 1. Anode 2. Cathode 3. VCC 4. OUT 5. GND 1 2004-02-13 TLP1004A(F),TLP1005A(F) Maximum Ratings (Ta = 25C) Characteristic Forward current Forward current derating (Ta > 25C) Reverse voltage Supply voltage Detector Output current Power dissipation Power dissipation derating (Ta > 25C) LED Symbol IF IF / C VR VCC IO PO PO / C Topr Tstg Tsol Rating 50 -0.33 5 17 50 250 -3.33 -25~85 -40~100 260 Unit mA mA / C V V mA mW mW / C C C C Operating temperature range Storage temperature range Soldering temperature (5 s) Recommended Operating Condition Characteristic LED forward current Supply voltage Low level output current Operating temperature Symbol IF VCC IOL Topr Min. 14* 4.5 -25 Typ. 5.0 Max. 20 17 16 85 Unit mA V mA C * 14mA is a value considering 50% LED deterioration. Initial value of the threshold input current is 7mA. 2 2004-02-13 TLP1004A(F),TLP1005A(F) Opto-Electrical Characteristics Characteristic Forward voltage LED Reverse current Peak emission wavelength Operating supply voltage Low level supply current High level supply current Detector (unless otherwise specified, Ta = -25~85C, VCC = 5V 10%) Symbol VF IR P VCC ICCL IF = *1 IF = *1, VCC = 17V IF = *2 IF = *2, VCC = 17V IOL = 16mA, IF = *1 Ta = 25C IOL = 16mA, IF = *1 VCC = 17V IF = *2 Ta = 25C Ta = 25C VCC = 17V Ta = 25C VCC = 17V TLP1004A(F) Test Condition IF = 10mA, Ta = 25C VR = 5V, Ta = 25C IF = 15mA, Ta = 25C Min. 1.00 4.5 0.9VCC Typ. 1.15 940 0.07 900 0.67 1.5 3 6 6 3 0.1 0.05 Max. 1.30 10 17 6.0 7.5 3.0 3.2 0.3 0.4 4 7 4 7 s mA mA V Unit V A nm V mA ICCH mA Low level output voltage VOL High level output voltage Peak sensitivity wavelength L H threshold input current H L threshold input current Hysteresis ratio Propagation delay time (L H) Propagation delay time (H L) Rise time Fall time VOH P IFLH IFHL TLP1005A(F) TLP1004A(F) TLP1005A(F) TLP1004A(F) TLP1005A(F) mA Coupled IFHL / IFLH tpLH VCC = 5V IF = 15mA RL = 280 Ta = 25C tpHL tr tf TLP1004A(F) TLP1005A(F) (Note) *1. 0mA for TLP1004A(F). 15mA for TLP1005A(F) *2. 15mA for TLP1004A(F). 0mA for TLP1005A(F). 3 2004-02-13 TLP1004A(F),TLP1005A(F) Note: Switching time test circuit TLP1004A(F) VOL. REG. 280 10k IF AMP VCC5V RL VOUT IF tpLH 50% tpHL 90% VOH VOUT tr 10% tf 1.5V VOL TLP1005A(F) VOL. REG. 280 10k IF AMP VCC5V RL VOUT IF tpHL 50% tpLH 90% VOH VOUT 10% tf tr 1.5V VOL Product Indication Model name Monthly production lot P1004A Production month (Jan.-Dec. are indicated by alphabets of A-L) Production year (last digit of A.D. is indicated) Stamp color : silver Abbreviation P1004A P1005A Type TLP1004A(F) TLP1005A(F) 4 2004-02-13 TLP1004A(F),TLP1005A(F) Precaution Please be careful of the followings. 1. Soldering should be performed after lead forming. 2. If chemicals are used for cleaning, the soldered surface only shall be cleaned with chemicals avoiding the whole cleaning of the package. 3. The container is made of polycarbonate. polycarbonate is usually stable with acid, alcohol, and aliphatic hydrocarbons however, with petrochemicals (such as benzene, toluene, and acetone), alkali, aromatic hydrocarbons, or chloric hydrocarbons, polycarbonate becomes cracked, swollen, or melted. Please take care when choosing a packaging material by referencing the table below. Phenomenon A Little deterioration but staining Chemicals Nitric acid (low concentration), hydrogen peroxide, chlorine Acetic acid (70% or more) Gasoline Methyl ethyl ketone, ethyl acetate, butyl acetate Ethyl methacrylate, ethyl ether, MEK Acetone, m-amino alcohol, carbon tetrachloride Carbon disulfide, trichloroethylene, cresol Thinners, oil of turpentine Triethanolamine, TCP, TBP Concentrated sulfuric acid Benzene Styrene, acrylonitrile, vinyl acetate Ethylenediamine, diethylenediamine (Chloroform, methyl chloride, tetrachloromethane, dioxane, 1, 2-dichloroethane) Ammonia water Other alkali B Cracked, crazed, or swollen C Melted ( ) : Used as solvent. D Decomposed 4. During 100s after turning on VCC, output voltage changes for stabilizing the inner circuit. 5. Supply the by-pass condenser up to 0.01F between VCC and GND near device to stabilize the power supply line. 5 2004-02-13 TLP1004A(F),TLP1005A(F) IF - Ta 60 300 PO - Ta (mW) PO Allowable power dissipation (mA) 50 250 IF 40 Allowable forward current 200 30 150 20 100 10 50 0 -20 0 20 40 60 80 100 0 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C ) IF - VF 100 (typ.) 1 0.5 0.3 VOL - IOL Ta =25C VCC =5V IF =15mA(TLP1005A(F)) IF =0 (TLP1004A(F)) (typ.) 50 (mA) 30 IF VOL Low level output voltage 1.3 1.4 10 5 3 Ta=75C 50 25 0 -25 1 0.8 0.9 1.0 1.1 1.2 (V) 0.1 0.05 0.03 0.01 0.005 0.003 Forward current Forward voltage VF (V) 0.001 0.5 1 3 5 10 30 50 100 Low level output current IOL (A) 6 2004-02-13 TLP1004A(F),TLP1005A(F) tpLH, tpHL - IF 10 (typ.) 100 Ta =25C VCC =5V 50 30 tr, tf - RL (typ.) Ta =25C VCC =5V IF =15mA 9 RL =280 (s) 8 tpHL(TLP1004A(F)) tpLH(TLP1005A(F)) 10 tpLH, tpHL (s) 7 5 3 tr Propagation delay time Rise and fall time 6 tr, tf 5 4 3 2 tpLH (TLP1004A(F)) tpHL (TLP1005A(F)) 1 0.5 0.3 0.1 0.05 1 0 0 0.03 tf 10 20 30 40 50 60 70 80 0.01 0.1 0.3 0.5 1 3 5 10 30 100 Forward current IF (mA) Load resistance R L (k) tpLH, tpHL - RL 9 tpLH tpHL (typ.) Ta =25C VCC =5V IF =15mA tpLH, tpHL (s ) 8 7 6 5 4 (TLP1004A(F)) (TLP1005A(F)) Propagation delay time (TLP1004A(F)) 3 2 1 0 0.1 (TLP1005A(F)) 0.3 0.5 1 3 5 10 30 50 100 Load resistance R L (k) 7 2004-02-13 TLP1004A(F),TLP1005A(F) TLP1004A(F) 1.2 Detecting Position Characteristics (1) (typ.) 1.2 TLP1004A(F) Detecting Position Characteristics (2) (typ.) Ta=25C VCC =5V IF =16mA Shutter 1.0 Ta=25C VCC =5V IF =16mA 1.0 + Relative output voltage 0.8 d Shutter 0.6 Relative output voltage 0 0.8 0.6 d 0.4 0.4 0.2 0.2 0 -0.4 -0.2 0 0.2 0.4 0.6 0 5.8 6.0 6.2 6.4 6.6 6.8 7.0 Distance d (mm) Distance d (mm ) TLP1005A(F) 1.2 Detecting Position Characteristics (1) (typ.) 1.2 TLP1005A(F) Detecting Position Characteristics (2) (typ.) Ta=25C VCC =5V IF =16mA Shutter Ta=25C VCC =5V IF =16mA 1.0 1.0 + Relative output voltage 0.8 d Shutter Relative output voltage 0 0.8 0.6 0.6 d 0.4 0.4 0.2 0.2 0 -0.4 -0.2 0 0.2 0.4 0.6 0 5.8 6.0 6.2 6.4 6.6 6.8 7.0 Distance d (mm) Distance d (mm) 8 2004-02-13 TLP1004A(F),TLP1005A(F) Positioning Of Shutter And Device To operate correctly, make sure that the shutter and the device are positioned as shown in the figure below. The shit pitch of the shutter must be set wider than the slit width of the device. Determine the width taking the switching time into consideration. Shutter A A' Unit in mm Sensor center 8min. 6.85 5.5max. A - A' Cross section 9 2004-02-13 TLP1004A(F),TLP1005A(F) RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 030619EAC * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. 10 2004-02-13 |
Price & Availability of TLP1005AF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |